Home » About Us
Fleming Island Electrical Company handles electrical work for homes and businesses across Fleming Island and Clay County, Florida. Whether you need a single outlet replaced, a full panel upgrade, or wiring run for a new circuit, we take the call, scope the job, and get it scheduled. We are available every day from 6:00 AM to 10:30 PM, so whether you are dealing with a fault that showed up this morning or planning work you have been putting off, there is a real window to reach us and talk through what needs to happen.
We work with homeowners, landlords, property managers, and commercial clients. The jobs vary, but the process stays the same: you call, we explain what the work involves, you get a price before anything is booked, and the work gets done.
Wiring is easier to deal with when somebody explains it plainly, and that starts on the first call. We cover the full range of residential and commercial electrical work: troubleshooting and repairs, breaker panel work, outlet and switch installation, lighting, ceiling fans, wiring and rewiring, and dedicated circuits for major appliances. If something in your home or business is not working the way it should, we can usually identify the cause on the phone and tell you what a visit will involve before you commit to anything.
Commercial jobs follow the same approach. Whether it is an office with a tripping breaker, a retail space that needs additional circuits, or a property manager dealing with a fault in a unit, we handle the diagnostic and the repair. Electrical work done to the code inspectors here enforce is the baseline for everything we do, residential or commercial.
We'll handle the wiring so you don't have to.
A breaker that keeps tripping, a fuse box that no longer meets the load, or a panel that was sized for a house with far fewer appliances than it now carries: these are the situations that bring most panel calls in. Older homes in Clay County often have 100-amp service or a fuse-based system that was never upgraded, and that becomes a real problem when you add a modern kitchen, a home office, or an EV charger to the picture.
We handle breaker panel replacements, 200-amp service upgrades, fuse box conversions, subpanel installation, and meter and service entrance work. A load calculation is part of sizing a new panel correctly, so we look at what the home draws now and what it is likely to draw after the upgrade before anything is specified. Florida's older housing stock, including the mix of postwar and mid-century construction still common across this part of the state, often has undersized service that was never brought up to match how the home is actually used.
We take pride in the electrical work we leave behind. Dependable service. A price agreed before we start. Local know-how.
The hardest part of an electrical problem is knowing when to call, and wiring is where that question comes up most. Older homes may have knob-and-tube wiring, aluminum branch circuit wiring, or runs that were added over the decades without being brought up to current standards. We handle whole-house rewiring, partial rewiring where only certain areas need attention, knob-and-tube replacement, and aluminum wiring remediation. The scope depends on what is there and what the inspection turns up.
Dedicated circuit installation is a separate category: a 240-volt circuit for a dryer or range, a circuit sized for a refrigerator or dishwasher, or a run for a workshop or garage that needs its own protected supply. Arc-fault and ground-fault breakers, grounding and bonding, and proper conductor sizing are all part of getting circuit work done correctly rather than just getting it done.
Local permit rules decide which electrical jobs need an inspection. When you call, we walk through what the job involves and whether a permit applies, so you know what to expect before the work starts. Call us and we'll walk you through the fix.
Getting your power back is easier than you think. A dead outlet, a switch that stopped responding, or lights flickering throughout the house are all common calls, and most of them have a clear cause once someone looks at the circuit properly. We install and replace standard outlets, GFCI outlets in kitchens, bathrooms, garages, and outdoor locations, AFCI outlets and breakers where code requires them, and USB outlets where convenience matters. If you are adding outlets to a room that never had enough, we can run the circuit and place them where they are actually useful.
Switch work covers standard replacements, dimmer installation, three-way switch wiring, and switches that have simply stopped working. Lighting installation runs from recessed lights and ceiling fixtures to under-cabinet lighting and full room lighting layouts. Ceiling fan installation and replacement, including wiring a fan where there was only a light fixture before, is a regular part of the work here. Wiring work checked against code before sign-off is how every job closes, regardless of how straightforward it looked at the start.
Florida's outdoor living spaces put real demands on the electrical system. Landscape and security lighting, weatherproof outlets for patios and garages, pool and spa electrical hookups, and workshop wiring all require circuits and fixtures rated for the exposure they will face. We install exterior lighting, outdoor outlets, and garage circuits built to handle the humidity and heat this area delivers year-round.
EV charger installation is a growing part of the work we do. A Level 2 home charger needs a dedicated 240-volt circuit, and in older homes that sometimes means a panel upgrade before the charger circuit can be added. We scope both together so you know exactly what the full job involves before anything starts.
Backup generator hookups and transfer switch installation matter here in a way they do not everywhere. Storm season in this part of Florida is real, and a properly wired transfer switch is the difference between a generator that powers your home safely and one that creates a hazard. Whole-home surge protection belongs in the same conversation: Florida's lightning exposure is among the highest in the country, and a single strike can damage appliances, electronics, and wiring that a panel alone does nothing to protect.
Quick to arrive. Careful with your home. Clean when we leave.
Reach out and describe what the breaker is doing.
When the job is done, we leave your home clean and powered, but getting there sometimes starts with not knowing what the problem is. A burning smell from an outlet, a sparking receptacle, half the house losing power, or a system that has never been looked at since the home was built: these are all reasons to schedule a diagnostic visit before something more serious develops.
Electrical safety inspections cover the panel, the branch circuits, the grounding and bonding, and the condition of visible wiring and devices. They are worth scheduling when you are buying a home, selling one, dealing with storm damage, or simply living in an older property that has never had a full review. A pre-purchase inspection gives a buyer a clear picture of what the system looks like and what, if anything, needs attention before closing. Surge protection and grounding are part of what an inspection evaluates, particularly in a region where lightning and storm events are a routine seasonal reality.
Fleming Island's residential mix covers a wide range, from newer construction in planned communities to older homes that have been added onto over the decades. That range matters for electrical work. Newer builds tend to have 200-amp service and modern panel layouts, but they still develop faults, need circuit additions, and eventually require fixture and device replacements. Older homes are a different picture: fuse-based panels, undersized service entrances, aluminum branch circuit wiring from the 1960s and 1970s, and wiring runs that were added without permits or proper sizing are all common findings once someone opens the panel and looks.
Clay County's coastal proximity also shows up in the work. Salt air accelerates corrosion on outdoor fixtures, outlets, and connections in a way that inland areas do not see at the same rate. Weatherproof and corrosion-resistant materials are not optional in this environment. They are the right specification for anything installed outside. Knowing what to expect before opening a wall or pulling a permit is part of scoping a job accurately, and that accuracy is what makes a quote mean something.
Pricing is discussed on the call, before anything is scheduled. When you describe the job, we explain what the work involves, what the visit covers, and what the rate is. You know the scope and the price before we confirm anything on the calendar. If the job turns out to be more involved than the initial description suggested, that gets discussed before the work continues, not after.
Common questions about cost come up on almost every call: what does a panel upgrade run, what does it cost to add a circuit, what is the rate for EV charger installation, how is rewiring priced. We answer those on the phone based on what your specific situation involves, because a number pulled from a general range does not tell you much about your job. Give us a call and we will get the power back on.
The work we do is local to this area. Fleming Island is where most of our calls originate, but we cover Clay County and the communities around it: Orange Park, Middleburg, Green Cove Springs, Oakleaf, Doctors Inlet, and Keystone Heights. If you are in the area and need electrical work handled, call and ask what the schedule allows for your location.
Each community in this part of Clay County has its own mix of housing ages, neighborhood layouts, and electrical demands. Older neighborhoods in Green Cove Springs and Middleburg often carry the same wiring and panel concerns as the older parts of Fleming Island. Newer development in Oakleaf tends toward modern panel configurations but still needs circuit additions, lighting work, and outdoor electrical as properties are improved. We work across that range without treating one type of job as more or less worth doing than another.
We cover Clay County and the communities around Fleming Island, including Orange Park, Middleburg, Green Cove Springs, Oakleaf Plantation, Doctors Inlet, Penney Farms, and Keystone Heights. We also serve the southern Jacksonville neighborhoods that border Clay County.
If you are unsure whether we reach your address, call (904) 289-4264 and ask.
Yes. Older homes in this part of Florida commonly have knob-and-tube wiring, aluminum branch-circuit wiring, and panels that were never upgraded from their original 100-amp or fuse-based configuration. We see these systems regularly across Fleming Island, Green Cove Springs, and Middleburg, and we explain what is there and what it means before any work begins.
When you call (904) 289-4264, you reach someone who knows the trade and can scope the job on the phone.
We ask about the symptom or the project, explain what the work involves, and confirm a price before anything is scheduled. You are not leaving a message for a callback or navigating an automated menu.
We are available every day from 6:00 AM to 10:30 PM, and calls during those hours are handled directly. For urgent situations, including faults that affect safety or leave part of the house without power, we work to get on the schedule as quickly as the day allows.
Call (904) 289-4264 and describe what is happening so we can assess the urgency.
Call us and describe what is happening. We want to understand whether the original fault was fully resolved or whether something else has developed. If the issue is related to the work we did, we treat it as a priority and come back to look at it.
It helps to observe when the fault happens, which circuits or areas of the house are affected, whether the breaker has tripped, and whether there is any smell, discoloration, or sound associated with the problem. That information lets us scope the job more accurately on the call and arrive prepared for what we are likely to find.
Fleming Island Electrical Company is available every day from 6:00 AM to 10:30 PM. Whether the job is urgent or planned, the process starts with a phone call. Call now. Get on the schedule. Know what the work involves.
Call (904) 289-4264 to describe what you are dealing with, get a price, and book a time that works.