Home » Electrical Services
Fleming Island Electrical Company handles electrical repair and installation for homes, rental properties, and businesses across Fleming Island and Clay County. Whether you are dealing with a dead outlet, a panel that needs upgrading, or a new build that needs wiring from the ground up, we scope the job on the call and get you on the schedule.
Wiring is easier to deal with when somebody explains it plainly, and that is exactly how we start every job. You call, we talk through what is happening, and you get a clear picture of what the work involves before anything is scheduled. We are available every day from 6:00 AM to 10:30 PM.
Dependable service. A price agreed before we start. Local know-how.
We'll handle the wiring so you don't have to.
The hardest part of an electrical problem is knowing when to call, and most of the symptoms that send people searching are worth taking seriously. A dead outlet or a breaker that keeps tripping is not always a minor inconvenience. It can point to a wiring fault, an overloaded circuit, or a connection that has started to fail.
Here is what we look at when you describe common problems:
GFCI and AFCI protection play a role in a lot of these calls. Code requires GFCI outlets in wet locations and AFCI protection on bedroom and living-area circuits. When we troubleshoot a fault, we check that existing protection is working correctly and flag anything that does not meet what the code inspectors here enforce.
Reach out and describe what the breaker is doing.
A panel that was sized for a house in an earlier decade was not designed for the load a modern home puts on it. Central air conditioning, EV chargers, tankless water heaters, and home offices all draw more than older service equipment was built to handle. When breakers trip under normal use, or when a contractor tells you a circuit cannot be added without a panel upgrade, that is the panel telling you it has reached its limit.
We handle panel replacements, 200-amp service upgrades, and subpanel installations for additions, garages, and detached outbuildings. A subpanel lets you extend capacity to a new space without running every circuit back to the main panel. We also perform load calculations before any upgrade so the new equipment is sized correctly for what the house actually draws.
Grounding and bonding get checked during panel work as well. An older home that has had additions or modifications over the years sometimes has grounding that was never brought up to current standards. We take pride in the electrical work we leave behind, and that means the panel we install is ready for inspection and ready for the load you are putting on it.
Dedicated circuits for dryers, refrigerators, and other large appliances are part of this work too. If an appliance keeps tripping a shared circuit, a dedicated run is the right fix.
Call us and we'll walk you through the fix.
Getting your power back is easier than you think, and most outlet and switch work gets handled in a single visit. We install and replace standard receptacles, GFCI outlets in kitchens, bathrooms, garages, and outdoor locations, AFCI outlets where code requires them, and USB outlets where you want a cleaner charging setup without an adapter block occupying the outlet.
Dimmer switches, three-way switches, and smart switch replacements all fall into the same category. If the wiring behind the box is in good shape, the swap is straightforward.
Lighting is where a lot of homeowners and property managers see the biggest visual difference from a single visit. We install:
Code requires GFCI protection on outdoor circuits, and we wire exterior lighting to meet that standard as a matter of course.
Give us a call and we will get the power back on.
Older homes in Clay County sometimes carry wiring that was acceptable when it was installed but poses real risk under the demands of modern electrical use. Knob-and-tube wiring lacks a ground conductor and was not designed for the loads modern homes put on it. Aluminum branch-circuit wiring, common in homes built during a period when copper was expensive, requires specific handling at every connection point to prevent overheating. Both are worth addressing, and we can walk you through what a rewire involves before you commit to anything.
Whole-home rewiring is a larger project, but it does not always mean walls torn open from end to end. The scope depends on the house, the existing wiring, and what access looks like. We explain the process on the call so you know what to expect.
EV charger installation fits naturally into this section because it is, at its core, a dedicated circuit job. A Level 2 home charger needs a 240-volt circuit run from the panel to wherever the car parks. We handle the circuit, the wiring, and the outlet or hardwired connection the charger requires.
With a local company, a question about the work gets a straight answer.
We'll handle the wiring so you don't have to.
We work for homeowners, landlords, property managers, and small businesses across Fleming Island. The work is the same trade whether the building is a single-family home, a rental duplex, or a retail space, but the priorities shift.
A homeowner calling about flickering lights wants the fault found and fixed. A landlord with a tenant complaint needs the same thing, plus documentation that the work was done correctly. A property manager overseeing multiple units wants someone who can scope jobs efficiently and communicate clearly about what each one involves.
For commercial customers, including offices, retail spaces, and light industrial buildings, we handle outlet and lighting installation, panel work, dedicated circuits for equipment, and electrical safety inspections. An inspection is also a practical step before purchasing an older property. It tells you what the wiring looks like, what is working correctly, and what will need attention.
Wiring work checked against code before sign-off is standard on every job we do, residential or commercial.
Reach out and describe what the breaker is doing.
Fleming Island sits in a part of Florida where the climate puts specific demands on electrical systems. Hurricane season runs from June through November. Lightning strikes here more often than almost anywhere else in the country. Backyard pools and spas are common, and outdoor living is genuinely year-round. The three services below come up constantly in this area, and for good reason.
A power outage during a Florida storm is not a minor inconvenience. It can mean days without air conditioning in serious heat, and for households with medical equipment or refrigerated medication, it is a genuine safety issue. We handle the generator hookup, the transfer switch installation, and all the wiring that connects a standby or portable generator to your home's electrical system. The transfer switch is the critical piece. It isolates your home from the utility line so the generator feeds your circuits safely, and it switches back automatically or manually when utility power returns.
Florida leads the country in lightning strikes, and Clay County gets its share. A single nearby strike can send a voltage spike through your service entrance that damages appliances, electronics, and wiring throughout the house. Whole-home surge protection installed at the panel level catches that spike before it reaches your circuits. It does not replace point-of-use surge strips for sensitive equipment, but it handles the large transients that individual strips are not rated for. We install surge protection devices during panel work or as a standalone job.
Pools and spas need dedicated circuits, GFCI protection, and wiring that meets the specific code requirements for wet and outdoor locations. The National Electrical Code has detailed rules about bonding, equipment grounding, and how close certain wiring methods can come to water. We handle the circuit work for pool pumps, spa heaters, underwater lighting, and the associated outdoor outlets and subpanels. If you are adding a pool or spa to an existing property, we assess whether the current panel has the capacity to carry the new load before any work starts.
Call us and we'll walk you through the fix.
When you call for a quote, you get the rate on the phone before anything is scheduled. We talk through what the job involves, what access it requires, and what the work covers. The price is confirmed before we book the visit.
We do not give you a number and then show up with a different one. If the scope changes once we are on-site because something unexpected turns up, we explain what we found and what it means for the cost before we proceed.
Electrical work varies in complexity, and the price for running a new circuit is not the same as the price for a panel replacement. The best way to get an accurate number is to call and describe what you are dealing with. A few minutes on the phone is usually enough to scope most jobs.
Give us a call and we will get the power back on.
We serve Fleming Island and the communities around it, including Orange Park, Middleburg, Green Cove Springs, Oakleaf Plantation, Doctors Inlet, Penney Farms, and the southern Jacksonville neighborhoods that border Clay County. If you are not sure whether we cover your address, call and ask.
A Level 2 home charger requires a dedicated 240-volt circuit, and whether your panel can support it depends on what the panel is currently rated for and what it is already running. We perform a load calculation before any EV charger circuit is run, so you know whether the panel can carry the additional load or whether an upgrade is needed first. If both jobs are required, we scope them together.
A whole-home surge protection device installs at the panel and intercepts large voltage spikes before they reach your circuits. Florida leads the country in lightning strikes, and a single nearby strike can damage appliances, electronics, and wiring throughout the house in seconds. A point-of-use surge strip handles smaller transients but is not rated for the kind of spike a direct or nearby lightning event produces. We install surge protection as a standalone job or as part of a panel upgrade.
Breakers that trip under normal household loads, breakers that feel warm to the touch, a panel that buzzes or makes clicking sounds, and circuits that can no longer be added without the panel hitting its limit are all signs the panel is not keeping up. Discoloration around breakers or a burning smell from the panel enclosure are more urgent and warrant a call as soon as you notice them.
We handle the electrical connection between the generator and your home's wiring: the transfer switch, the dedicated circuit from the panel, and the wiring that ties everything together. The transfer switch is the safety-critical piece. It keeps utility power and generator power from feeding each other simultaneously, which is a hazard for utility workers and for the generator itself. We confirm panel capacity and size the circuit for the generator's output before any work starts.
Pool and spa installations require dedicated circuits sized for the pump and equipment load, GFCI protection at every point the code requires, and wiring methods rated for wet and outdoor locations. The National Electrical Code has specific bonding and grounding requirements for water features, and we follow them on every job. We handle the circuit work for pool pumps, spa equipment, underwater lighting, and outdoor outlets, but we stay on the electrical side and do not touch the equipment itself.
Outdoor wiring and fixtures in this area are exposed to heat, humidity, and salt air year-round. We specify weatherproof and corrosion-resistant materials for anything installed outside, because the standard indoor-rated components degrade faster in this environment than the manufacturer ratings assume. GFCI protection is required on all outdoor circuits, and we wire exterior work to meet that standard as a matter of course.
Dryers, ranges, refrigerators, dishwashers, and workshop equipment each need a circuit sized for their load and protected at the right breaker rating. Running a major appliance on a shared circuit leads to nuisance tripping and, over time, wiring that runs hotter than it should. We size and run dedicated circuits for all of these, and we can add them during a panel upgrade or as a standalone job.
If there is only a light fixture in the ceiling, the existing box is almost certainly not rated to support a fan. We replace it with a fan-rated box, wire the switch leg for the fan and light separately if the switch wiring allows, and install the fan. If there is no ceiling box at all, we run the circuit and install the box before the fan goes up.
We test every circuit, outlet, and fixture before we leave. For outlet work, that means confirming the receptacle is live and that GFCI protection trips and resets correctly. For panel work, we verify that each breaker is correctly labeled, that the load is distributed properly, and that the grounding and bonding are in order. Wiring work is checked against code before sign-off on every job.
We are available every day from 6:00 AM to 10:30 PM, and we take short-notice work when the schedule allows. Faults that affect safety or leave part of the house without power are treated as priorities.
Call (904) 289-4264 and describe what is happening so we can assess what the schedule can accommodate.
Knob-and-tube wiring lacks a ground conductor and was not designed for modern electrical loads. Aluminum branch-circuit wiring requires specific handling at every connection point to prevent overheating at the terminations. Both require careful remediation rather than a simple swap. We assess what is there, explain the scope, and let you decide how to proceed before any work begins.
When the job is done, we leave your home clean and powered, and the work holds up to inspection.
Call (904) 289-4264 to get on the schedule. We are available every day from 6:00 AM to 10:30 PM.
Call now. Get on the schedule. Know what the work involves.
Reach out and describe what the breaker is doing.
Below is a plain-language look at the electrical services we handle for homes, rental properties, and businesses in Fleming Island and across Clay County. Each row covers what the work involves, who it fits best, and one practical thing worth knowing before you call. If your situation does not fit neatly into a row, call and describe what is happening and we will scope it on the phone.
| Service | What It Covers | When You Need It | Things to Know |
|---|---|---|---|
| Dedicated Appliance Circuits | Circuits for dryers, ranges, and refrigerators, Workshop and equipment circuits, Dishwasher and tankless water heater feeds, EV charger 240-volt circuit runs | Homeowners adding a major appliance or whose appliances keep tripping a shared circuit | Running a high-draw appliance on a shared circuit causes nuisance tripping and, over time, wiring that runs hotter than it should. A dedicated circuit is the right fix. |
| Pool & Spa Wiring | Dedicated circuits for pumps and spa equipment, GFCI protection at required locations, Bonding and grounding for water features, Underwater lighting and outdoor outlet circuits | Homeowners adding a pool or spa, or updating wiring on an existing water feature | The National Electrical Code has detailed bonding and grounding requirements specific to pools and spas. We assess panel capacity before any circuit work starts. |
| Lighting Installation | Recessed and LED retrofit fixtures, Under-cabinet and landscape lighting, Outdoor security and motion-sensor lights, Dock and waterfront lighting for wet locations | Homeowners refreshing interior lighting or adding exterior coverage | All outdoor circuits require GFCI protection. In Florida's humidity and heat, fixture and wiring material selection matters as much as placement. |
| Breaker & Fuse Repair | Breaker replacement, Fuse panel assessment, Circuit fault tracing, GFCI and AFCI device testing | Homes where a breaker trips repeatedly or will not hold a reset | A breaker that trips under normal load is signaling a fault in the circuit, not just an inconvenience. Tracing it before replacing parts saves time and cost. |
| Electrical Panel & Service UpgradesMost Popular | 200-amp service upgrades, Panel replacement and subpanel installation, Load calculations before sizing, Grounding and bonding brought to current standards | Homes adding EV chargers, major appliances, or additions that exceed current panel capacity | Panel work is inspected to the code inspectors here enforce. We confirm the new equipment is sized correctly for the actual load before anything is installed. |
| Electrical Repairs & Troubleshooting | Dead outlets and failed receptacles, Flickering or dimming lights, Tripping breakers traced to source, Burning smells and sparking outlets | Any homeowner or landlord with an active fault or unexplained symptom | A burning smell or repeated sparking at an outlet needs immediate attention, not a wait-and-see approach. |
| Whole-Home Generator Installation | Transfer switch installation, Generator-to-panel wiring, Standby and portable generator hookups, Panel capacity confirmation before hookup | Households that cannot afford days without power during hurricane season or that depend on medical equipment | The transfer switch is the safety-critical piece. It isolates your home from the utility line so the generator feeds your circuits safely and prevents backfeed to the utility. |
| Electrical Safety Inspections | Full wiring and panel assessment, GFCI and AFCI protection check, Grounding and bonding review, Pre-purchase inspection for older properties | Buyers evaluating an older home, landlords keeping rental properties current, or any homeowner who has not had a wiring review | An inspection before purchasing an older property tells you what the wiring looks like, what is working correctly, and what will need attention before or after closing. |
| Ceiling Fan Installation | Fan-rated box installation, Switch leg wiring for fan and light, Replacement of existing fixtures, New circuit runs where needed | Homeowners adding or replacing ceiling fans, especially where no existing wiring or rated box is in place | A standard light fixture box is not rated to support a fan. If the existing box is not fan-rated, we replace it before the fan goes up. |
| Wiring & Circuit Installation | Whole-home rewiring, Knob-and-tube and aluminum wiring remediation, New circuit runs for additions or garages, Subpanel wiring for detached outbuildings | Older homes with outdated wiring or any property being expanded or renovated | Aluminum branch-circuit wiring requires specific handling at every connection point to prevent overheating. We assess what is there and explain the scope before any work begins. |
| Outlet & Switch Installation | Standard, GFCI, and AFCI receptacles, Dimmer and three-way switch replacements, USB outlet installation, Smart switch wiring | Homeowners updating older outlets or adding convenience and code-required protection | GFCI outlets are required by code in kitchens, bathrooms, garages, and outdoor locations. If your home has older two-prong or ungrounded outlets in those areas, it is worth addressing. |
| Surge & Lightning Protection | Whole-home surge protection device at the panel, Protection against large voltage transients, Installation during panel work or as a standalone job, Coordination with point-of-use strips for sensitive equipment | Any Fleming Island or Clay County home exposed to frequent lightning activity | Florida leads the country in lightning strikes. A panel-level surge protection device catches large transients that individual surge strips are not rated to handle. |
When does a home actually need a full panel upgrade versus just a breaker replacement?
A single failed breaker usually means replacing that breaker. But when multiple breakers trip under normal loads, when the panel runs out of open slots, when a contractor tells you a new circuit cannot be added, or when the panel itself buzzes or feels warm, those are signs the panel has reached its limit. We perform a load calculation before recommending an upgrade so the decision is based on what the house actually draws, not a guess.
Is electrical work in Fleming Island permitted and inspected?
Most panel replacements, new circuit runs, and service upgrades require a permit and a follow-up inspection by the local authority. We handle the permit process where it applies and make sure the work is ready for inspection before sign-off. We take pride in the electrical work we leave behind, and that includes making sure it meets what the code inspectors here enforce.
What does it mean if my lights dim when a large appliance kicks on?
Dimming that happens every time a refrigerator compressor, air handler, or other motor-driven appliance starts is usually a sign that the circuit or the panel is struggling to supply the startup current those loads demand. It can also point to a loose connection or a service entrance issue. Either way, it is worth a call, because the symptom tends to get worse rather than better on its own.
Faults Traced Before Anything Is Replaced
We find where the problem starts before recommending a fix. Replacing parts without tracing the fault often means the symptom comes back.
How do I know if a warm or buzzing outlet is an emergency?
A warm outlet or a buzzing sound from a receptacle or switch is not normal and should not be ignored. Heat at an outlet means current is flowing somewhere it should not, which can mean a loose connection, a failing device, or a wiring problem behind the box. A buzzing sound often points to a loose wire or a device that is arcing internally. Both are worth a prompt call rather than something to watch and wait on.
What is GFCI protection and where is it required in a home?
A GFCI outlet or breaker monitors the current flowing through a circuit and cuts power in a fraction of a second if it detects an imbalance, which is the condition that occurs when current is taking an unintended path through a person or a wet surface. Code requires GFCI protection in kitchens, bathrooms, garages, outdoor locations, and anywhere near water. We check existing protection during troubleshooting visits and flag anything that does not meet current requirements.
How do you handle grounding and bonding in an older home?
Older homes, especially those that have had additions or modifications over the years, sometimes have grounding that was never updated to match current standards. Two-prong outlets in living areas, missing ground conductors on branch circuits, and bonding that was not extended to new metallic components are all common findings. We assess what is there during panel work or as part of a safety inspection and explain what would be involved in bringing it up to current standards.
Code-Compliant Work on Every Job
Whether the job is a single outlet or a full panel replacement, the work is checked against code before sign-off. That applies to residential and commercial work alike.
Can I add a workshop or garage subpanel without upgrading the main panel?
It depends on what the main panel is currently rated for and how much capacity is already in use. A load calculation tells us whether the main panel can feed a subpanel for a garage or workshop without hitting its limit. If there is headroom, a subpanel is a straightforward job. If the main panel is already near capacity, we scope both jobs together so you know what is involved before anything starts.
What is involved in wiring a home for a Level 2 EV charger?
A Level 2 charger requires a dedicated 240-volt circuit run from the panel to wherever the car parks, either to a NEMA 14-50 outlet or hardwired directly to the charger. The circuit size depends on the charger's amperage rating. We perform a load calculation first to confirm the panel can carry the additional circuit, and if an upgrade is needed we scope both jobs together. The circuit, the wiring, and the connection to the charger are all part of what we handle.
Scope Agreed Before the Panel Is Opened
You get the price and a clear picture of what the work involves before anything is scheduled. If the scope changes once we are on-site, we explain what we found before we proceed.
How long does a panel upgrade or service replacement typically take?
Most panel replacements are a full day of work. That covers removing the old equipment, installing the new panel, transferring and labeling each circuit, and verifying that grounding, bonding, and breaker sizing are all in order. Larger jobs that include a service entrance upgrade or a subpanel addition may run into a second day. We give you a realistic scope on the call so you know what to expect before we book the visit.
Do I need to be home when the electrical work is being done?
For most jobs, yes. Access to the panel, individual rooms, and the electrical service entrance is usually required at various points during the visit. For rental properties, a landlord or property manager who cannot be on-site can arrange for a tenant or representative to provide access, but someone needs to be available to confirm the scope and the findings when the work is done. We confirm the details on the call before scheduling.
What is the difference between a whole-home surge protector and a standard power strip?
A point-of-use surge strip protects the devices plugged into it from smaller transients that occur during normal grid operation. A whole-home surge protection device installs at the panel and is rated to intercept the large voltage spikes that a nearby or direct lightning strike sends through the service entrance. In an area like Clay County, where lightning activity is among the highest in the country, panel-level protection handles what individual strips cannot.
Call (904) 289-4264 and describe what you are dealing with. A few minutes on the phone is usually enough to scope the job and give you a price before anything is booked.